HobbyKing
EDF DUCTED FAN UNIT 7BLADE 5INCH 127MM
| Blade Diameter | 127mm / 5inch |
| Outer Case Diameter | 135mm |
| Wall Thickness | 3mm |
| EDF Length | 98mm |
| Shaft Size | 6mm |
| Recomended Motor | 45-70 Turn (22.2v) |
| ESC | 120A |
| Rpm | 1,000kv |
| Power | 1500~5000g Thrust |
Motor Mount Holes:, (Adjustable, from 22~37mm), Blade Type:7,
EDF Ducted Fan Unit 5 7 Blade This fan will ...5 Reviews
HobbyKing
TURNIGY 3648 BRUSHLESS MOTOR 1450KV
| Diameter of shaft | ?strong>F5mm |
| Length of front shaft | ?strong>F19.1mm |
| Magnet type | 45SH |
| No. of cells | 3-6S |
| RPM | 1450kv |
| Max efficiency current | 45A-50A |
| No load current | 11.1/4.6A |
| Current capacity | 70A/20sec |
| Internal resistance | 0.010ohm |
| Voltage | 3-6S |
| Prop | 7x5, EDF90 |
| ESC | 60A |
| Thrust | 1450-2300g |
| Power | 1600W |
Dimension:, 36mm x 51mm, 70mm(with shaft), Weight:, 181g (kv1450) (not including connectors), Lamination thickness: ., Specification:,
2mm Max performance; For EDF 1500~1800g model airplane. Download data ...5 Reviews
HobbyKing
FPV TRANSMITTER & 1/3-INCH CCD CAMERA PAL
| CCD sensor type | 1/3 color SONY CCD |
| PAL | 500(H)*582(V) |
| Scanning system | Interlaced scanning |
| Synchronization | System |
| Horizontal resolution | 420TV line |
| DSP+CCD | CXD3142R+405AK |
| S/N Ratio | 48dB |
| Gamma Modification | 0.45 |
| White balance | Auto |
| Auto backlight compensation | Auto |
| Lens | 3.6MM |
| Input voltage | 9~12.6V |
| Electronic Shutter | 1/50 (60) ~ 1/100,000s |
| Video output | 1.0VP-P composite video |
| Operation Temp. | -20~50 |
| Size | 38*38mm |
| Flight time | Approx 60min/100mah 3S |
| Power | 100mW |
| Voltage Regulator | 3S -> 5v |
| Without voltage regulator | 2~6V |
Audio: No, Weight: 8g, Channels: 4, Usage:, 1 3S lipoly will power the camera and via the voltage regulator it will power the Tx on 5v. You will need a 2.4Ghz video receiving unit to receive the image. We do not include the 2.4Ghz Rx unit because there are many different types and styles available and bundling them together will not suit most customers.,
Compatible with most 2.4Ghz video receiver systems this FPV camera ...5 Reviews
HobbyKing
EDF55 WITH C20 MOTOR ASSEMBLED 4100KV 199.8W
| Motor Kv | 4100rpm/v |
| Test Voltage | 11.1v (3-4S) |
| Test Current | 18A |
| Thrust | 440g |
| Power | 199.8W |
| Motor | C20pro 4100kv |
| Weight | 47g |
Test Results:, @10v | 16A | 395g | 160W |,
EDF55 with C20 Motor Assembled 203W A good plug in ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 1800MAH 2S 25~50C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance! Spec.Capacity: 1800mAhVoltage: 2S1P / 2 Cell / 7.4VDischarge: 25C Constant / 50C BurstWeight: 113g (including wire, plug & case)Dimensions: 115x35x15mmBalance Plug: JST-XHDischarge Plug: XT60 *The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. More than 90% at 100% C rate.-Fast charge capable,
5 Reviews
HobbyKing
TURNIGY INFRARED THERMOMETER (-33 ~ 180CELSIUS)
| Operating Range | 0~50C (32~122F) |
| Full Range Accuracy | +/- 2.5C, 2.5% |
| Distance | 2~40cm |
| Emissivity Range | 0.95 fixed |
| Wave Length | 5um~14um |
| Power Supply | LR44X2 |
Measuring Range :, -33~180C (-27.4~356F), Spot Range: 1:1 (1mtr distance measures 1mtr spot size),
The all new Turnigy temp checker now handles temp up ...5 Reviews
HobbyKing
TURNIGY 3648 BRUSHLESS MOTOR 850KV
| Diameter of shaft | 5mm |
| Length of front shaft | 18.8mm |
| Magnet type | 45SH |
| Voltage | 2-3S |
| Prop | APC13x6.5 |
| Thrust | 1660g |
| Power | 900W |
| Download data files | TURNIGY MOTOR DATA |
Dimension:, 51mm x 37mm, 70mm(with shaft), Weight:, 136g (kv850) (not including connectors), Lamination thickness: .,
2mm Max performance For 1500~1800g airplane & 500 size helicopter.5 Reviews
HobbyKing
FOX EPO GLIDER 2.32M (91.4IN) PLUG-N-FLY (V2)
| Wing Span | 2320mm |
| Length | 1290mm |
| Flying Weight | 1150g |
| Power system | 750kv Brushless motor |
| ESC | 30A (with brake) |
| Radio | 4 channel, 4 servos. |
5 Reviews
HobbyKing
EDF DUCTED FAN UNIT 7 BLADE 4.5INCH
| Blade Diameter | 4.5inch / 115mm |
| Outer Case Diameter | 122mm |
| Wall Thickness | 2mm |
| EDF Length | 113mm |
| Shaft Size | 6mm |
| ESC | 100A |
| Power | 1500~4000g Thrust |
| http | //www.hobbyking.com/community/forum_posts.asp?TID=459 |
Blade Type:7, Recomended Motor:, 36-50 4 Turn (22.2v), Rpm: 1,
EDF Ducted Fan Unit 7 Blade 4.5inch Made from high ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 4000MAH 3S 25~50C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 4000mAhVoltage: 3S1P / 3 Cell / 11.1VDischarge: 25C Constant / 50C BurstWeight: 333g (including wire, plug & case)Dimensions: 173x49x20mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connector *The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.Greater thermal control, pack usually doesnt exceed 60degCThickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.Higher capacity during heavy discharge. More than 90% at 100% C rate.Fast charg,
5 Reviews
HobbyKing
TURNIGY 450 H2218 BRUSHLESS OUTRUNNER 3200KV
| Model | 2218 |
| Cells | 2~4S |
| No load Current | 3.6A/10V |
| Max power | 500W |
| Weight | 67g |
| Shaft diameter | 3.17mm |
| Dimensions | 27.2 x 36.5mm |
| Recomended ESC | 2~4S/50A |
Turns: 4, Kv: 3200rpm/V,
This motor is specifically designed for the 450 helicopter range ...5 Reviews
HobbyKing
IMAX B6 CHARGER/DISCHARGER 1-6 CELLS (GENUINE)
| Input Voltage | 11~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~5.0A |
| Discharge current range | .1~1.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 277g |
| Dimensions | 133x87x33mm |
| http | //hobbycity.com/cs/files/folders/manuals/default.aspx |
| Note | Power supply not included. |
: This is a,
The IMAX B6 is a very advanced charger, able to ...5 Reviews
HobbyKing
TURNIGY 450/500 H2223 BRUSHLESS OUTRUNNER 4400KV
| Model | 2223 |
| Cells | 2~3S |
| No load Current | 5.2A/10V |
| Max power | 600W |
| Weight | 82g |
| Shaft diameter | 3.17mm |
| Bolt holes | 16.5mm & 19mm |
| Dimensions | 27.2 x 42mm |
| Recomended ESC | 2~4S/50A |
Turns: 4, Kv: 4400rpm/V, Bolt thread: M3,
This motor is specifically designed for the 450/500 helicopter range ...5 Reviews
HobbyKing
ICHARGER 106B-PLUS 250W 6S BALANCE/CHARGER
| Input voltage range | 10.0 – 18.0VDC |
| Charge current range | 0.05 – 10.0A |
| Discharge current range | 0.05 – 7.0A |
| Maximum discharge power capacity | 20W |
| Maximum extern discharge power capacity | 170W @ 20V/7A |
| Current drain for balancing | <300mA |
| Balance accuracy | <10mV |
| Lithium (LiPo/LiIo/LiFe) battery cell count | 1 – 6 series |
| NiCd/NiMH battery cell count | 1 – 17 series |
| Intelligent temperature control | Yes |
| PC Connect | USB port |
| Weight | 350g |
| Dimensions (L X W X D) | 134X83X25mm |
| Note | Power supply not included. |
Maximum charge power capacity :, 250W @ input voltage > 13.5V, Pb battery cell count :, 1 – 12 series (2 – 24V), Battery setup memories :10,
Capable of handling up to 250W or 10A charge rates. ...5 Reviews
HobbyKing
TURNIGY2836 BRUSHLESS OUTRUNNER 1200KV
| Magnet type | 45SH |
| Voltage | 3-4S Lipoly |
| Prop | APC9x6 |
| Thrust | 1100g |
| Power | 340W |
Dimension:��, Weight:, 74g (kv1200) (not including connectors), Diameter of shaft:��, Length of front shaft:��, Lamination thickness: .,
28mm x 37mm, 55mm(with shaft) F4.0mm F19mm 2mm Max performance;5 Reviews